JEDEC previews DDR6 with 12.8 GT/s starting speed
JEDEC has previewed the DDR6 memory standard, outlining modules with a 12.8 GT/s starting transfer rate, a wider data bus and a shorter physical design. The standard remains in development, and the preview does not establish when products will reach consumers or what configurations they will use.
The roadmap lists speeds of 14.4 GT/s and beyond. JEDEC’s figures describe registered DIMMs, or RDIMMs, beginning at 12.8 GT/s. The specification also expands the data bus from 64 bits in DDR5 to 96 bits in DDR6, arranged as four 24-bit subchannels rather than two 32-bit subchannels.
Those changes increase the theoretical bandwidth available to a module. A comparison of baseline transfer rates gives 153.6 GB/s for DDR6 at 12.8 GT/s, against 38.4 GB/s for DDR5 at 4.8 GT/s. That fourfold comparison uses the two standards’ baseline rates; comparing DDR6’s starting rate with higher-speed DDR5 modules produces a smaller gain. JEDEC has said the specification’s bandwidth advances do not guarantee a matching improvement in application performance, which can depend on other hardware and software factors.
The preview gives DDR6 modules a length of 74 millimeters, compared with 133 millimeters for...